top of page
< Back

Team/Crib Application Recommendations

TEAM®/CRIB® Application Recommendations


Storage:TEAM®/CRIB® Eco-friendly products should preferably be stored horizontally on a flat surface. For stacking, it is recommended to use a base of 18 mm or 13 mm thickness. Vertical stacking should be minimized wherever possible. If vertical stacking is necessary, proper vertical support must be provided before stacking. A uniform gap should be maintained between each product, from one end to the other.


Sawing:We recommend using tungsten carbide-tipped saw blades and fine-toothed crosscut saws. To achieve clean cuts, ensure proper adjustment of the saw blade projection above the product. Keep the product in motion during cutting to prevent heat build-up.

For better cutting quality, use a panel saw with a counter blade attached to a high RPM motor. To prevent overheating, tools with larger chip spaces should be used.


Following area covered with TEAM®/CRIB®/Eco-friendly (Acid Resistance) One Side Checkered



  • Flooring of Battery Room area.

  • Battery bench

  • Side wall of Battery Room area

  • Drain Area

  • Acid Rack 

  • Acid Tank Area

  • Washing AreaFlooring of Battery Room area.

  • Battery bench

  • Side wall of Battery Room area

  • Drain Area

  • Acid Rack 

  • Acid Tank Area

  • Washing Area



Battery Box (Used in Coaches) Using TEAM®/CRIB® (Acid Resistance) One Side Checkered



  • Measurement

  • Thickness : 11 mm

  • (A & B) Back panel & floor size : 1245 mm length x 480 mm height 

  • (C & D) Both side panels size: 480 mm width x 150 mm height 

  • Variations: All sizes +/- 10%. 

  • Quantity: 3 Boxes in one coach. 








Sketch of Battery Charging Room (USE) TEAM®/CRIB® (Acid Resistance) One Side Checkered


(A) Flooring to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant) after concreting.Size: Thickness 32 mm x Length 8850 mm x Width 6100 mm / Height 6700 mm

(B) Washing pit to have the inner area covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant).Size: Thickness 20 mm / 30 mm x Length 2440 mm x Width 600 mm / Height 900 mm

(C) Table to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant).Size: Thickness 20 mm / 30 mm x Length 1520 mm x Width 1220 mm / Height 600 mm

(D) Electric tank platform to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant) [outer covering].Size: Thickness 20 mm / 30 mm x Length 1830 mm x Width 900 mm / 600 mm

(E) Battery table to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant).Size: Thickness 20 mm / 30 mm x Length 2440 mm x Width 600 mm / Height 300 mm

(F) Wall area to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant) on the original wall.Size: Thickness 7 mm x Length 8840 mm x Width 6700 mm / Height 1300 mm

(G) Drain area to be covered with TEAM®/CRIB®/Eco-Friendly (Acid Resistant), one side checkered.Size: Thickness 20 mm / 30 mm x Width 150 mm x Height 150 mm x Top 150 mm x Length as per customer’s requirement.


Note: Variations for all sizes mentioned above are +/- 10%.

bottom of page